China Smart Sensor Co.
Manufacturer of Liquid Level Sensor,Ultrasonic Sensor, Wind Sensor and Touch switch
Menu
Home » Products » Pressure Transmitters » Wireless Pressure Transmitter » Wireless Pressure Transmitter For Petroleum Chemical Metallurgy Pharmaceutical Fields
Wireless Pressure Transmitter For Petroleum Chemical Metallurgy Pharmaceutical Fields

Wireless Pressure Transmitter For Petroleum Chemical Metallurgy Pharmaceutical Fields

wireless pressure Transmitter

1.    Summary

The wireless pressure measuring system is mainly used in the occasion where the power supply is not convenient or in the outdoor, such as the energy delivery pipe. It can realize the wireless transmission of the signal. With the wireless communication module, the system can monitor the aquired data by the PC.

The wireless pressure measuring system consists of terminal, router and net coordinator.

The CSS-T12 wireless pressure transmitter is the terminal of the measuring system. With battery supply, wireless communication function and LCD display, the CSS-T12 is a high precision smart pressure measuring instrument. the CSS-T12, using international advanced sensor, integrated circuit (IC) and accessories, is a high-precision, high quality, small volume, easy installation, use simple, cost-effective pressure transmitter. The CSS-T12 also can effectively prevent block of the signal channel and data losing. using the embeded Zigbee wireless communication module, the 2.4GHz radio frequency R-T device which is compliant with Zigbee protocol standard and the CSSMA/CA mechanism for conflict prevention.

2. Features of the wireless communication

Intermission working type, receiving current <55mA, emission current≤70mA, intermission current<3030µA.

The R-T time can be reset for reducing the power dissipation.

Wireless communication module, using the single chip micro-controller and RF IC, has a high reliability.

System bandwidth is 2.4GHz-2.4835GHz. there are 16 signal channels. The alternation of the signal channel is 5MHz

The system typical transmission rate is 9600bps, and the max transmission rate can reach 125kbps

high anti-interference ability, low BER, and the efficient forward error correction channel coding technology which improves the data anti-interference ability.

use the CSSMA/CA mechanism for conflict prevention, which prevents block of the signal channel and data losing.

3. Dimension

4. Specifications

Power supply: 3.6V lithium battery

Range:0-600bar (others on request)

Accuracy:0.5%FS

Frequency range: 2.405GHz-2.480GHz

Commucation rate: 9600bps

Transmission distance: 400m

Pressure interface: G1/2

IP rating: IP65

Data update rate: transmit the data per second (others on request)

Battery using time: more than half a year (when the data updata rate is 3 minute)

5. LCD Display

The CSS-T12 has a LCD display. It is convenient to monitor the real time aquired data.

6. Battery

Battery type: lithium battery ER34615M(Fute Battery). (parameters of the battery: NO.1 lithium battery, 3.6V, 14.5Ah)

Installation of the battery

The battery is installed at the back side of the tranmitter. Open the back cap, there is the battery clip. Please turn off the battery switch, when install or uninstall the battery.

Battery switch

The Battery switch is at the back side of the battery clip. Turn on the switch, the transmitter start working. Turn off the switch, the transmitter stop working.

7. Maintenance

When the reciever does not communcate with the pressure transmitter:

Check the distance between the reciever and the pressure transmitter. Is the distance far? Or is there a barrier?

Check the volume of the battery. If the volume of the battery is lower, please change the battery.

Check the antenna.

Please contact the supplier, if you have any troubles.

Home Who We AreProductsWorkshopContact UsOrder Photo ShowSensor News RSS
CoryRight © China Smart Sensor Co. All Rights Reserved.